This set of lightweight horns that fit close to the head could be the perfect addition to your project, be it for your tiefling, qunari, demon, devil, monster, faun, or fey costume, for decoration, or as part of a prop! These are raw 3D prints without attachments, ready to be finished by your creative touch.
This is a 3D printed product of a model made solely by our workshop intended for costuming or display. These are a RAW PRINT, we have only removed supports and excess material. Layer lines are still visible, like all 3D printed pieces. These come with NO ATTACHMENTS, only a flat base for you to work with. You can sand, prime, paint, and make your own attachments as you see fit.
Blemishes may occur in colors other than black, we always recommend painting your horns.
Do not leave in a car in hot weather, PLA may warp.
Our similar style horns designed to be attached to the forehead with a skin-safe adhesive: https://etsy.me/3X6ux0Y
===== Included =====
x2 – 3D printed horns, a left, and right side.
These horns are symmetrical.
===== Size =====
23 cm (9″) long from the front to back tip.
34 cm (13″) long along the outer curve.
The base is very flat and merges with the rest of the horn, but is approximately 7×6 cm (2.75 x 2.25″).
If you desire, you can mold the base slightly we heat in order to indent it to fit your head better.
===== Weight =====
~112g (3.95 oz) for both horns. Both horns weigh about the same as a Rubrik’s Cube!
Send us a message if you would like them printed in a different size, we can set up a custom order for you since pricing will change.
For more information on this product or about commissions and requests, please leave us a message!
Have something specific in mind that you don’t see? Send us a message! We may be able to make just what you’re looking for.
===== PLA =====
Currently, we exclusively use PolyTerra™️ PLA by PolyMaker for our prints. PolyTerra PLA is a bioplastic-based 3d printing filament designed from the ground up to create the next generation of PLA, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.” bit.ly/plyterra
We sell our defective prints, shred our failed prints and support material for reuse or recycling, and recycle the packaging and spools for our filament.
===== Tag Us! =====
If you’ve used one of our prints or models, we would love to see your project and share it with our community! Please tag us on social media <3 linktr.ee/shadowfallworkshop